2022-11-19
2023-08-22Graphite crucibles have good thermal conductivity and high temperature resistance. During high-temperature use, their coefficient of thermal expansion is small, and they have certain strain resistance for rapid heating and cooling. Strong corrosion resistance to acid and alkaline solutions, with excellent chemical stability.But the following points should be noted:1. To avoid damage to the graphite crucible caused by impact or falling from a height. Be careful when using, handle with care, and take a look at the surrounding environment.2. The graphite crucible must be strictly protected from moisture and must be stored in a dry place or on a wooden frame.3. Prevent strong corrosive flames from directly spraying the sides and bottom of the crucible.4. Before use, it is necessary to heat bake and dry
2023-08-22Graphite plate is a good technical property, and its good properties are widely used in various industries. Due to the excellent chemical and physical properties of the product, it has gradually become a key raw material for making grinding tools. Graphite belongs to the raw material of graphite carbon. During the production process, alkaline resistant organic chemical compounds are added, and then subjected to high-pressure manufacturing and forming. After undergoing high-temperature heat treatment, production and processing are carried out, thereby reducing the porosity of graphite products, improving the relative density of products, and possessing good alkali resistance and wear resistance. Graphite plates have high-quality characteristics and are suitable for industries such as forging, metallurgy, and grinding tools. CNC lathe processing machines and equipment further enhance the overall production and manufacturing level, and consider the requirements for precision and surface
2023-08-211. High thermal conductivity: Due to the use of raw materials such as graphite with high thermal conductivity, the melting time is shortened.2. Heat resistance and shock resistance: Strong heat resistance and shock resistance, resistant to cracking during rapid cooling and heating.3. High heat resistance: High fire resistance, capable of withstanding high temperatures ranging from 1200 to 1600 ℃.4. Erosion resistance: Strong resistance to erosion of molten soup.5. Resistance to mechanical impact: Having a certain degree of strength to resist mechanical impact (such as the input of molten materials).6. Oxidation resistance: Graphite is prone to oxidation at high temperatures in oxidation aerosols, and due to oxidation prevention treatment, oxidation consumption is relatively low.7. Anti adhesion: Because graphite has the characteristic of not easily adhering to molten soup, the immersion and adhesion of molten soup are less.
2023-08-21The characteristic of high-power and ultra-high-power electrodes is low resistivity, allowing for a current load of 25% -40% higher than that of ordinary electrodes; The allowable current density is greater than twice; Low coefficient of thermal expansion; High flexural strength; Low oxidation loss. The production of high-power and ultra-high-power electrodes uses needle coke as the raw material, and multiple impregnations are used in the production process to increase the graphitization temperature, and corresponding improvements are made to the bonding and impregnating agents.The requirements for ultra-high power graphite electrodes are relatively strict. The volume density of the electrode reaches 1.72g/cm3; The resistivity drops to 5-7 Ω. mX10-6. Due to the fact that the current density allowed by ultra-high power is more than twice that of ordinary electrodes, the thermal stress and impact it bears increase. Therefore, the electrode requires a low coefficient of thermal expansion
2023-08-21(1) Calcination. Both petroleum coke and asphalt coke need to be calcined at a temperature of 1350 ℃ to fully remove the volatile matter contained in the carbonaceous raw material and improve the true density, mechanical strength, and conductivity of the coke.(2) Crushing, screening, and batching. Crush and screen the calcined carbon raw materials into designated size aggregate particles, grind some coke into fine powder, weigh according to the formula, and aggregate to form a dry mixture of various particles.(3) Mix and knead. Mix and knead the dry mixture of various particles with a certain amount of binder in a heating state to form a plastic paste.(4) Forming. Under external pressure (extrusion molding) or high-frequency vibration (vibration molding), the paste is pressed into a certain shape and high density of raw electrodes.(5) Roasting. Place the raw electrode in a specially designed roasting furnace, and use metallurgical coke powder to fill and cover the raw electrode. At a
2023-08-16Carbon graphite material is a powder structure material similar to refractory materials and concrete. Except for non-ferrous brushes and mechanical metal graphite products, which are formed as a whole with a certain strength by phase transformation of metal powder at sintering temperature, the powder particles of typical carbon graphite materials cannot spontaneously bond together even at high temperatures. In order for them to bond into a whole with a certain shape and strength, a certain amount of substance that can bond carbon powder particles or fibrous fine substances into a whole must be added, and this substance is called a binder.The conditions that the adhesive should meet:1) The adhesive should be able to mix with the main material to form a plastic substance.2) The binder becomes a viscous liquid within an appropriate temperature range. And it can have good adhesion and adsorption with the particles of the main material, and has a large adsorption force.3) The binder should
Haifeiling owns domestic advanced technology, equipment and high-level R D team, and is committed to creating well-known brand trademarks of Haifeiling products
4008-168-001
