News

Learn more about our dynamics

Home > 
  • News
  • >
  • Industry Dynamics
  • Company News Industry Dynamics

    2022-11-19

    Do you know the difference between carbon felt purification and graphite felt?

    Carbon felt is a felt made of carbon fiber, which has a wide absorption spectrum and a large capacity. Graphite felt can be made by high temperature graphitization. Graphite felt is mainly used as thermal insulation material for monocrystalline silicon smelting furnace.Carbon felt purification can be used as adsorption purification material, as insulation material for vacuum furnace and inert gas furnace. In addition, carbon fiber materials have advantages in fields that have strict requirements on strength, stiffness, weight, fatigue characteristics, etc., and in occasions that require high temperature and high chemical stability. The carbon content is about 90%, and the service temperature is about 1000 degrees Celsius.The main use of graphite felt is as insulation material for monocrystalline silicon smelting furnace. It can be used as a filter material for high-purity corrosive chemicals in the chemical industry. Under the condition of non-oxidizing atmosphere, the service tempera
    LEARN MORE
    2023-11-20

    Inspection of graphite crucibles before application

    Graphite crucibles have excellent thermal conductivity and heat resistance during the pre application inspection work. During the entire high-temperature application process, the linear expansion coefficient is small, and they have certain strain resistance performance for rapid heating and quenching. Strong corrosion resistance to acid and alkaline solutions, with high-quality organic chemical reliability. It is widely used in metallurgical industry, forging, mechanical equipment, chemical plants and other industries for smelting alloy tool steel, rare metals, and aluminum alloys, and has good practical safety engineering effects.Generally speaking, in the inspection work of graphite crucibles before application, the following key aspects should be ensured:1. The first step is to check the graphite crucible for cracks before work. If there are no cracks, the graphite crucible needs to be heated to 600 ° C and dried sufficiently.2. There should be no water stored around the furnace or

    2023-11-16

    Classification of Graphene

    There are two classification methods for graphene. One is based on the number of layers, which can be divided into four categories: single-layer, double-layer, few layer, and multi-layer products; Another type of product can be divided into three categories according to its form: powder, slurry, and film. Graphene powder and graphene thin film are currently the two main forms of graphene materials. The former is mostly doped in other materials and is widely used in coatings and lithium-ion batteries; Graphene thin films are widely used in the fields of electronics, photons, and optoelectronic devices due to their advantages of transparency, conductivity, and flexibility. Different graphene products have certain differences in raw materials due to different preparation methods. Graphene powder is mainly formed by physical or chemical methods, and the main raw material is natural graphite. Graphene thin films are mainly deposited by chemical vapor deposition, and their raw materials are

    2023-11-16

    Brief Introduction to the Use Technology of Graphite Electrodes

    1. Varieties of graphite electrodesElectric arc steelmaking furnaces are generally divided into three categories, namely ordinary power electric furnaces, high-power electric furnaces, and ultra-high power electric furnaces. Corresponding to the power level of electric furnace steelmaking, graphite electrodes are also divided into three types, namely ordinary power graphite electrodes (code RP level), high-power graphite electrodes (code HP level), and ultra-high power graphite electrodes (code UHP level). The nominal diameter of the electrode ranges from 75mm to 700mm. The physical and chemical properties of high-power and ultra-high-power graphite electrodes are superior to ordinary power graphite electrodes, such as low resistivity, high bulk density, high mechanical strength, low linear expansion coefficient, and excellent antioxidant performance. The physical properties of three types of graphite electrodes are shown in Table 1.Selection of graphite electrodes for AC arc steelmak

    2023-11-15

    How to measure the conductivity of graphite powder

    Graphite powder has high conductivity. The conductivity of graphite powder is an important factor in the conductive finished product of graphite powder. There are many factors that affect the conductivity of conductive graphite powder, such as the ratio of graphite powder, external pressure, environmental humidity, humidity, and even light. The following methods can usually be used to measure the conductivity of graphite powder:1. Voltammeter method for measuring resistanceSpecific method: Use a precision small range electricity meter or a resistance multimeter to measure and compare the experiment. You can use a small light bulb to measure its conductivity based on its brightness. If the light bulb is brighter, it indicates a smaller resistance.2. Measuring the conductivity of conductive graphite powder through resin methodGo buy some resin for conductive paint, add the same amount of conductive graphite powder, and then apply it on a board to measure its conductivity using a digital

    2023-11-15

    Several methods for preparing nano graphite powder using natural graphite

    (1) Detonation cracking methodThe detonation cracking method utilizes the properties of graphite that can accommodate foreign negative ion layers to form expandable graphite or lower order GICs, where the ion layer contained is called the insertion layer. In expandable graphite or low order GICs, the insertion layers are regularly arranged in graphite layers. During detonation, the insertion layer rapidly decomposes and releases a large amount of gas, impacting the graphite layers and pushing adjacent graphite layers apart to prepare nano graphite thin sheets. During the detonation process, * * plays two roles simultaneously: firstly, it releases a large amount of heat during the explosion, causing the decomposition of expandable graphite or lower order GICs; The other is to use the shock wave generated during detonation to crush the graphite sheet, achieving the effect of refining the graphite, thereby preparing flake graphite with smaller diameter and very thin thickness.At present,

    2023-11-14

    Is it true that diamonds "fly" out of graphite powder

    Do you know what a diamond is? Its chemical composition is carbon (C), and natural diamonds can only be called "diamonds" after being polished by diamonds. Natural diamonds are very rare, with only 2 diamonds weighing over 1000 carats (1 gram=5 carats) in the world and only a few diamonds weighing over 400 carats. The largest diamond discovered in China to date weighs 158.786 carats, which is known as the "Changlin Diamond". Rare things are precious, and precisely because natural diamonds that can be used as "diamonds" are rare, people want to replace them with "artificial" diamond, which naturally reminds them of the "twin" brother of diamonds - graphite.The chemical composition of diamond and graphite is carbon (C), which scientists refer to as "homomorphic variants" or "allotropes". From this term, it can be inferred that they share the same "quality", but their "form" or "nature" are different and vastly different. Diamond is currently the hardest substance, while graphite is one

  • 第一页
  • <
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • >
  • 最后一页