Classification of Graphene_Industry Dynamics_News

Classification of Graphene

Time：2023.11.16Browse：1: Share:

There are two classification methods for graphene. One is based on the number of layers, which can be divided into four categories: single-layer, double-layer, few layer, and multi-layer products; Another type of product can be divided into three categories according to its form: powder, slurry, and film. Graphene powder and graphene thin film are currently the two main forms of graphene materials. The former is mostly doped in other materials and is widely used in coatings and lithium-ion batteries; Graphene thin films are widely used in the fields of electronics, photons, and optoelectronic devices due to their advantages of transparency, conductivity, and flexibility. Different graphene products have certain differences in raw materials due to different preparation methods. Graphene powder is mainly formed by physical or chemical methods, and the main raw material is natural graphite. Graphene thin films are mainly deposited by chemical vapor deposition, and their raw materials are mainly products such as methane and ethanol.

Brief Introduction to the Use Technology of Graphite Electrodes

Return to List

Relevant News

2023-10-26

What issues should be paid attention to when using graphite crucibles

Graphite crucibles have a wide range of uses in the metallurgical industry, and their main function is to hold various liquid metals. As a metallurgical manufacturer, it is necessary to use graphite crucibles, otherwise there may be some problems in later production and use.Although graphite crucibles are of good quality and not easily damaged, they should also be handled with care. Falling or bumping from high altitude may not have a significant impact on its quality, but if it continues to do so for a long time, it may crack or even break. After this situation occurs, there is no way to remedy it, and we can only replace it with a new one.2. Graphite crucibles are prone to moisture, and the product will become soft after being affected by moisture. When struck by some impactful objects, it will deform. And once water enters the graphite crucible, it will affect the raw materials contained inside, causing dilution of the raw materials, and even causing some chemical reactions to furt

2024-03-19

Graphene: the new star of future materials technology

Graphene, known as "black gold", has become a new star in the field of materials science and technology with its excellent physical properties and wide application prospects.Graphene has super-strong electrical

2023-08-17

Graphite anode plate

Graphite anode is a graphite plate, block, or rod used as an anode for electrolytic cells in the electrolysis industry. It has characteristics such as high temperature resistance, good conductivity and thermal conductivity, easy machining, good chemical stability, strong acid and alkali corrosion resistance, and low ash content.There are two types of electrolysis industry using graphite anodes, one is aqueous solution electrolysis, and the other is molten salt electrolysis. In the past, the chlor alkali industry, which used to produce caustic soda and chlorine gas by electrolysis of salt water solutions, was the largest user of graphite anodes. However, the chlor alkali industry now widely uses the ion membrane electrolysis process for alkali production, and the graphite anode diaphragm method for alkali production has gradually been phased out. Therefore, the production of graphite anodes is in an extremely shrinking state. Currently, graphite anodes are only used in industries such

2023-09-05

The purpose and function of graphitization

Graphitization is a high-temperature heat treatment process in which the roasted product is placed in a high-temperature furnace and heated to a temperature above 2300-2500 ℃ in a protective medium, transforming the hexagonal carbon atom plane grid from a two-dimensional disordered arrangement to a three-dimensional ordered graphite structure.Its purpose and function are:1. Improve the thermal and conductive properties of materials;2. Improve the thermal stability, thermal shock resistance, and chemical stability of materials;3. Improve the lubrication and wear resistance of materials;4. Remove impurities from the material and improve purity;5. Reduce the hardness of the material to facilitate mechanical processing.

2023-09-04

Carbon products for aluminum and carbon blocks and crucibles for metallurgical furnaces

Aluminum (magnesium) electrolysis uses pre baked anodes and anode paste, mainly produced from petroleum coke and asphalt coke, sometimes with a small amount of artificial graphite added. China is rich in bauxite. Since the 1980s, the electrolytic aluminum industry has developed rapidly, and for every ton of aluminum produced, approximately 450KG of pre baked anode is required. Therefore, carbon for aluminum has developed rapidly. But anode paste, like electrode paste, is considered a phased out product.The content of boron, vanadium, nickel, and sodium in the raw materials for pre baked anodes should be strictly limited.Carbon blocks used in various metallurgical furnaces (such as the side blocks of ironmaking blast furnaces, ferroalloy furnaces, calcium carbide furnaces, and aluminum electrolysis cells) are all used at high temperatures, so carbon blocks should have high mechanical strength, good thermal stability, and corrosion resistance, but the requirements for ash content are no

2023-03-08

Introduce the asphalt rubber pendant penetration processing process of graphite board

Introduce the general operating process of graphite board asphalt jelly penetration processing process. After the general operation process of graphite board immersion is installed in the commodity, first vacuum packaging (absorbing the gas in the air pores in the pores of the goods) is then put in the impregnation agent, and then applied to the liquid level Press, make the pores of the penetrated goods. It is used for different intentions, and the standards of impregnation agent processing process are not thorough. Below, I will introduce the asphalt rubber mud impregnation processing process of graphite board in detail.The whole process of processing the processing technology of asphalt rubber -soaking small graphite board, electrode connector and its graphite anode board:First of all, the semi-finished processing surface of the graphite board was burn, and then put it into the product box and put it in the temperature of about 4 hours in the temperature of about 240-Soot. After the

2023-02-09

Graphite hydrillinosteric acid method

Hydrofluoric acid is a strong acid, which can react almost with any impurities in the graphite, and graphite has good acid resistance. In particular, it can resist hydrofluoric acid. It determines that graphite can be purified with hydrofluoric acid. The main process of hydrofluoric acid method is mixed with graphite and hydrofluoric acid. The hydrofluoric acid and impurities response generate soluble substances or volatiles for a period of time. After washing and r

2023-08-02

The Application of Expandable Graphite

1. Sealing material: the raw material high carbon graphite is mixed with concentrated sulfuric acid and nitric acid for acidification treatment, heat treatment and then pressed into shape. The prepared flexible graphite is a new high-performance sealing material and a nano material grown in situ. Compared with traditional sealing materials such as asbestos rubber, it has good Compressibility, resilience, self-adhesion, low density and other excellent properties, and can be used at high temperature It has been used for a long time under harsh working conditions such as high corrosion. Graphite plates and sealing elements made of it are widely used in aerospace, machinery, electronics, nuclear energy, petrochemical, electric power, shipbuilding, smelting and other industries. Because of its excellent characteristics such as light weight, conductivity, heat conduction, high temperature resistance, acid and alkali corrosion resistance, good resilience, lubrication, plasticity and chemical

2023-10-17

How is expanded graphite produced?

Due to the fact that graphite is a non-polar material, it is difficult to intercalate with small polar organic or inorganic acids alone, so oxidants are usually required. The chemical oxidation method generally involves soaking natural flake graphite in a solution of oxidants and intercalators. Under the action of strong oxidants, graphite is oxidized, causing the neutral network of planar macromolecules in the graphite layer to become positively charged planar macromolecules. Due to the extrusion effect of isotropic positive charges between positively charged planar macromolecules, the spacing between graphite layers increases, and the intercalation agent is inserted between the graphite layers to form expanded graphite.Expanded graphite will rapidly shrink when heated at high temperatures, with shrinkage times reaching tens to hundreds or even thousands of times. The apparent volume of contracted graphite reaches 250-300 milliliters/gram or more. The shrunken graphite is in the shap

2022-11-22

Do you know the difference between carbon felt purification and graphite felt?

Carbon felt is a felt made of carbon fiber, which has a wide absorption spectrum and a large capacity. Graphite felt can be made by high temperature graphitization. Graphite felt is mainly used as thermal insulation material for monocrystalline silicon smelting furnace.Carbon felt purification can be used as adsorption purification material, as insulation material for vacuum furnace and inert gas furnace. In addition, carbon fiber materials have advantages in fields that have strict requirements on strength, stiffness, weight, fatigue characteristics, etc., and in occasions that require high temperature and high chemical stability. The carbon content is about 90%, and the service temperature is about 1000 degrees Celsius.The main use of graphite felt is as insulation material for monocrystalline silicon smelting furnace. It can be used as a filter material for high-purity corrosive chemicals in the chemical industry. Under the condition of non-oxidizing atmosphere, the service tempera

News